Fluke MT8200-60A
IntelliTone™ Pro 200 LAN Toner and Probe
CAN Electronic Indonesia
www.canelectronic.com
canelectronic.ind@gmail.com
021 6232 0266, 2607 1120 / 26
Models
| Model Number/Name | Description |
| MT-8200-60-KIT | IntelliTone Pro 200 LAN Toner and Probe Kit Includes: IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables, test leads with alligator clips, (2) lanyards, quick start guide, and (2) 9-volt batteries |
| MT-8200-61-TNR | IntelliTone Pro 200 LAN Toner Includes: IntelliTone Pro 200 LAN Toner, coax F connector adapter, RJ11 and RJ45 patch cables, test leads with alligator clips, lanyard, quick start guide, and 9-volt battery |
| MT-8200-63A | IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ45 patch cables, lanyard, quick start guide, and 9-volt battery |
Accessories
| Model Number/Name | Description |
| MT-8202-05 | IntelliTone Case Heavy-duty pack cloth padded and lined case with belt loops and d-ring |
| MT-8203-20 | Test Leads with Bed of Nails Set of two Banana Jack test leads with piercing pin 'Bed of Nails' alligator clips with vinyl sleeves |
| MT-8203-22 | Test Leads with Alligator Clips Set of two Banana Jack test leads with standard alligator clips with vinyl sleeves |
Specifications
| GENERAL SPECS | |
| Operating temperature | 32 °F to 104 °F (0 °C to 40 °C) |
Storage temperature | -4 °F to +140°F (-20 °C to °C) |
Operating relative humidity (% RH without condensation) | 95 % (50 °F to 95 °F; 10 oC to 35 °C) 75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C) |
Vibration | Random, 2 g, 5 Hz-500 Hz |
Shock | 1 m drop test |
Safety | EN 61010-1, Category: None |
Altitude | 3000 m |
EMC | EN 61326-1, FCC Part 15 B |
Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
Applications | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200. |
| TONER SPECS | |
| Dimensions | 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
| Display | LED |
| Control | Thumbwheel switch |
| Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring |
| Toner frequency | IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs |
| Ouptut power | 5 V p-p |
| Auto power down | Turns off automatically after 2 1/2 hours of inactivity |
| PROBE SPECS | |
| Dimensions | 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
| Display | (8) LED indicators, Sync LED indicator |
| Audio | IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal |
| Control | Thumbwheel switch, volume control wheel |
| Tone detection | Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap Detects analog SmartTone signal (500-1200Hz) and other analog toners. |
| Toner interface | Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling. |
| Auto power down | Turns off automatically after 1 hour of inactivity |
Tidak ada komentar:
Posting Komentar