Atten
Function Generator AT8602B
CAN Electronic Indonesia
www.canelectronic.com
canelectronic.ind@gmail.com
021 6232 0266, 2607 1120 / 26
Specification:
TECHNICAL SPECIFICATIONS
a) 0.2Hz-2Hz
b) 2Hz-20Hz
c) 20Hz-200Hz
d) 200Hz-2kHz
e) 2kHz-20kHz
f) 20kHz-200kHz
g) 200kHz-2MHz
Output signal impedance : 50 Ω
Vernier vertical sensitivity : Continuously variable to 1/2.5 or less of panel-indicated value
Output signal wave-form : Sine Wave, Square Wave, Rectangle Wave, Saw Tooth Wave And Triangle Wave
Output signal amplitude : • Non-attenuate (2Vp-p~20Vp-p) ± 20% continuously adjustable
(peak-peak
value) • Attenuate 20dB (0.2Vp-p~2.0Vp-p) ± 20% continuously adjustable
• Attenuate 40dB (20mVp-p~200mVp-p) ± 20% continuously adjustable
The above are measured with load 1MΩ the output signal amplitude will be half of standard at 50Ω load
Function output symmetry adjust scope : 20%~80% (±10%)
Output signal features : a) Sine wave distortion: < 2%
b) Triangle wave linear: > 99% (10%-90% of output amplitude)
c) Square wave rise edge times: less than 100nS (10%-90% of output amplitude)
d) Square wave fall edge times: less than 100nS (10%-90% of output amplitude)
e) Square wave rise and fall pulse less than or equal to 5%Vo (50Ω load)
f) Test condition: frequency output: 10 KHz, amplitude :5Vp-p,warm-up for 20minutes
Output signal frequency stability less than ± 0.1%/min (test condition is the same as the above)
Amplitude : Display (only for 50Ω load, at 1MΩ load, the real output amplitude is double of the displaying value)
a) Display digits: 2/3 digits (decimal point automatic select place)
b) Display units: Vp-p or mVp-p.
c) Display errors: Vo ±10% ±1d (Vo refers to the true value of output signal)
d) Resolution: Non-attenuate : 0.2Vp-p
20dB attenuate: 20mVp-p
40dB attenuate: 2mVp-p
Frequency display : Display range: 0.2Hz-2MHz
Display effective digit: Four or Five digits
Measurement errors : ≤ 0.5%
Time base : Frequency: 12MHz
Frequency stability: ± 5x10-5
Working temperature : 0ºC ~ 40 ºC
Size : 270mm x 215mm x 100mm
Weight : approx.1.6kg
Power applicability and consume : 110V/220V ±10% 50Hz/60Hz ±5%, power consume ≤ 15W
• Attenuate 40dB (20mVp-p~200mVp-p) ± 20% continuously adjustable
The above are measured with load 1MΩ the output signal amplitude will be half of standard at 50Ω load
Function output symmetry adjust scope : 20%~80% (±10%)
Output signal features : a) Sine wave distortion: < 2%
b) Triangle wave linear: > 99% (10%-90% of output amplitude)
c) Square wave rise edge times: less than 100nS (10%-90% of output amplitude)
d) Square wave fall edge times: less than 100nS (10%-90% of output amplitude)
e) Square wave rise and fall pulse less than or equal to 5%Vo (50Ω load)
f) Test condition: frequency output: 10 KHz, amplitude :5Vp-p,warm-up for 20minutes
Output signal frequency stability less than ± 0.1%/min (test condition is the same as the above)
Amplitude : Display (only for 50Ω load, at 1MΩ load, the real output amplitude is double of the displaying value)
a) Display digits: 2/3 digits (decimal point automatic select place)
b) Display units: Vp-p or mVp-p.
c) Display errors: Vo ±10% ±1d (Vo refers to the true value of output signal)
d) Resolution: Non-attenuate : 0.2Vp-p
20dB attenuate: 20mVp-p
40dB attenuate: 2mVp-p
Frequency display : Display range: 0.2Hz-2MHz
Display effective digit: Four or Five digits
Measurement errors : ≤ 0.5%
Time base : Frequency: 12MHz
Frequency stability: ± 5x10-5
Working temperature : 0ºC ~ 40 ºC
Size : 270mm x 215mm x 100mm
Weight : approx.1.6kg
Power applicability and consume : 110V/220V ±10% 50Hz/60Hz ±5%, power consume ≤ 15W
Tidak ada komentar:
Posting Komentar